PRODUCTS / The Puligriglie



ADVANTAGES:

that will make you choose our Puligriglie patented and CE certified

  1. You will not need to replace usable grids only because they are dirty. This results in an estimated saving of 500€ per table.
    Furthermore, before deciding to replace dirty grids, there will be a period where these will be more or less full of slag, compromising the sheet support surface.
  2. If you work with dirty grids the cutting waste will attach to a bigger surface area and will lift the sheet. Besides, greater points of reflections of the laser beam that will ruin the underside of the sheet. Furthermore, in case of stainless steel there could be the risk of creating rust spots. In general, difficulties for loading and unloading to pass between the grids.
  3. The Puligriglie contrasts and leans only on the grid that is being cleaned it does not lift the ones next to it and does not move them from their place. The plate is higher than the wheels and it is used to stabilize the Puligriglie.
  4. It can be easily pushed and does not ruin the grids if made of copper: the Puligriglie advances on wheels and does not scrape the grids.
  5. It has a small plate and related inserts, it is simple to pass from one grid to another. If you use those now on the market, an operator will need to tilt the tool in order to clean the next grid.
  6. High torque: for each cutter.
  7. HSS drills: currently the competition is equipped with very economical hardened or cemented steel tools, ours are much quicker in removing the slag.
  8. Extremely robust: designed and built with quality materials.
  9. Minimum maintenance: there are no parts that need to be replaced at regular intervals, the only operation to be performed is the control of the sharpening of the drills and the possible replacement.
  10. The cutters are durable: in the best condition up to 20,000 meters. The competition requires a periodic replacement with consequent costs.
  11. Puligriglie weight 23 kg: it can be raised by a person. The value is within the limits allowed by the regulations.

Cutting speed:

  1. Max. one-way cutting with slightly dirty grids: 28 meters per minute
  2. Max. one-way cutting with medium dirty grids: 13.5 meters per minute
  3. Max. one-way cutting with very dirty grids: 8.5 meters per minute




PG-H15-1.5-39-__ = Laser table L 1.5 m - grids sp. 4 mm

PG- H15-2-39-__ = Laser table L 2 m - grids sp. 4 mm


PG-H15-1.5-40-__ = Laser table L 1.5 m - grids sp. 3 mm

PG- H15-2-40-__ = Laser table L 2 m - grids sp. 3 mm


PG-H15-1.5-41-__ = Laser table L 1.5 m - grids sp. 2 mm

PG- H15-2-41-__ = Laser table L 2 m - grids sp. 2 mm


ATTENTION: minimum space between grids 45mm


Developer: C.F. LAMIERE di Fantini Claudio Duranti S. Zanni M. & C. s.a.s
Via Piane, N. 12/C 47853 Coriano (RN) Tel. 0541/656410
Info: cflamiere@cflamiere.com
Monger: Fabrizio Venturelli V&O Services srl Tel. 380 454 1246
Info: venturellivo@gmail.com